The K5435R 1 Gang Sensolux Energy Controller receives presence (movement) and light value (IR component) of ambient light information from the K5754 Sensolux Presence Detector to switch various electrical loads, with optional additional manual wired or wireless transmitter switches. A maximum of 8 presence detectors and 8 switch transmitters can be assigned to each energy controller receiver, while a presence detector transmitter can operate an unlimited number of energy controller receivers. The receiver is designed to be installed into a flush mounted installation box.
Standard function: Full automatic mode
The SENSOLUX Solar-presence detector K5754 registers the presence of persons and switches on the lighting via the K5435R receiver. When no more movement is detected, the light is switched off with a settable light-on time or when a specified light value (daylight) is reached. However, the user can at any time switch the lighting on or off via a conventional or Echo radio control switch.
Selectable functions: Semi-automatic mode
The lighting is switched on manually and switched off via the presence detector. The light-on time, light level, daylight or twilight parameters can be set in both modes.
Voltage supply 230V~/50Hz:
Terminals L, N
Remote switch input 230V~/50Hz
Load output 230V~/50Hz:
Transmit frequency 868,3 MHz
Voltage supply 230V~ / 50 Hz
Power line protection Automatic circuit breaker 16 A
Ambient temperature + 5° to + 50°C
Test specifications EN 60669-2-1
Type of protection IP20
Connection Screw Terminals
Incandescent lamps (resistive) 2300 W
HV halogen lamps 1250 W
Fluorescent lamps 1000 VA
Inductive loads 600 VA
Electronic ballast loads 5x
MK Electric technical helpline: 01268 563720
Email: email@example.com Web: www.mkelectric.com